|
NAKAYAMA #1 MARUKA ASAGI AWASADO
211mm x 75mm x 26mm
Reads on the stone top from the upper right down,
JUN SHOSHIN HONYAMA (pure specially chosen original mountain) which is a
registered trade name,
And 26 (an inventory or grading number)
And at the middle SAIKOKYUHIN (very best quality)
Marked faintly on the end of the stone in a rectangle
KA SHO HON YAMA * (Maruka correct true original mountain).
This Nakayama Maruka awasedo toishi stone is
NEW/OLD stock from a closed store in Japan. It has not been used other
than to test the quality at one edge of the stone as you can see in the
photos.
You may find other references to the Maruka Nakayama
mines on the internet. This mine was known throughout its history to produce
the finest awasedo finishing stones in Japan and probably in the world.
The Maruka stamp on the end, the registered stamp on the top of this stone
and the single toothed fine saw marks help to date the stone to before
WW2.
This is an
actual Maruka Nakayama awasedo, it is not a fake. Stones of this color and
varity have not been mined from Nakayama for well over half a century and they never
will be mined again as these rare deposits are depleted. The mine was
closed in the 1960s and I will not be
able to replace or offer these stones again.
This is a very hard stone and it requires advanced
sharpening skills to use. The change in color indicates it is from the
edge of the strata. These very hard stones are more easily used if a
diamond nagura (DN) plate is used before hand to build up a slurry.
| HARDNESS
SCALE BASE ON 1-10 |
10+ |
|
|
| GRIT
BASE OF 1-10 |
10+ |
|
|
| CUTTING
SPEED/STRENGTH
1-10 |
7 |
10 w/DN** |
|
| COST
DOES NOT INCLUDE SHIPPING |
$2200 |
|
|
*In usage when you encircle a kanji word as in this case KA, it becomes
MARU (circle) KA or MARUKA.
**DN-Diamond Nagura
|