SHIRO SUITA #200 AWASEDO

 

HOME     SUITASHOP    

NAKAYAMASHOP    NARUTAKISHOP    SHAPTON 30K

CLICK PHOTO TO ENLARGE

Copy of 200.jpg (263838 bytes)

GRIT TEST FOR Suita #200

HARDNESS TEST 

Suita #200

 

 

SUITA#50
SUITA#52
SUITA#53
SUITA 54
SUITA#56
SUITA #57
SUITA_#58
SUITA #62
SUITA #63
SUITA #64
SUITA65
SUITA74
SUITA_75
SUITA78
SUITA79
SUITA #145
SUITA_200
SUITA_201
SUITA_202
SUITA_203
SUITA_204
SUITA_205
SUITA_206
SUITA_207
SUITA_208
SUITA_209
SUITA_210
SUITA_211
SUITA_212
SUITA_213
SUITA_214
SUITA_215
SUITA_216
SUITA_217
SUITA_218
SUITA_219
SUITA_220

 

 


 





  
   

 

SHIRO SUITA AWASEDO w/Renge

209 - 75 - 40mm

1.7 kg. = 3.9 lbs.

A full site fast cutting stone with lots of renge particles that boots this to make this a winning stone. In fact from the side of the stone you can see the renge in layer after layer right down towards the beautifully rich natural skin on the back. This stone has a grit base of in the low 40,000 range and produces the classic hazy mirror to the hard steel hagane while leaving the soft steel jigane soft and contrasting. This stone can be used with any steel, white or blue.

The stone is visually very pleasing with a peach color glow with rich flecks of red lotus flower renge particles. It was probably marked Hon Suita when it was new.

This is a very hard stone and requires some experience in sharpening, but the aid of a DN will tame this stone and make it much easier to use. After being photographically compared to the the grit of the Shapton 30,000 I would consider this Suita #50 to be well into the 40,000's grit level to the 42,000 range.

 

   HARDNESS                       Based on scale 1-10    10-  
   GRIT                                                scale 1-10    10-  
   CUTTING SPEED/STRENGTH             1-10     8  10+*
   COST                    Does not include shipping   SOLD  

*If a diamond plate induced slurry is used.