SUITA #217 AWASEDO

 

HOME     SUITASHOP    

NAKAYAMASHOP    NARUTAKISHOP    SHAPTON 30K 

CLICK PHOTO TO ENLARGE

Copy (3) of 217.jpg (227053 bytes)

 

GRIT TEST FOR

 

 

SUITA#50
SUITA#52
SUITA#53
SUITA 54
SUITA#56
SUITA #57
SUITA_#58
SUITA #62
SUITA #63
SUITA #64
SUITA65
SUITA74
SUITA_75
SUITA78
SUITA79
SUITA #145
SUITA_200
SUITA_201
SUITA_202
SUITA_203
SUITA_204
SUITA_205
SUITA_206
SUITA_207
SUITA_208
SUITA_209
SUITA_210
SUITA_211
SUITA_212
SUITA_213
SUITA_214
SUITA_215
SUITA_216
SUITA_217
SUITA_218
SUITA_219
SUITA_220

 

 


 





  
   

 

SUITA AWASEDO

205 - 77 - 43mm

1.7 kg. = 3.9 lbs.

Reads from the top right down SHO HONZAN AWASE TOISHI (pure original mountain finish stone)

And down the middle right SUITA

This light colored suita stone aggressively cuts both white and blue steel. It is hard and when sharpening leaves black filings in a pool of clear water. If a diamond nagura is used, the stone cuts very very fast.  A full size stone that is meaty thick with faint spots of dark nashi-ji it is an old mined stone from around the 1930s to 1940s that and has a microns thin sheen of oxidation that when worn through the stone will look lighter in color and will be easier to use because the suita pores will open up for water retention to help create and maintain a slurry. This sheen can be taken off immediately with a diamond plate or through use in sharpening and is already thinner in the test area towards the lower half of the stone.

It came from a closed up store in a small town in Japan.

  

   HARDNESS                       Based on scale 1-10    10-  
   GRIT                                                scale 1-10    9++  
   CUTTING SPEED/STRENGTH             1-10    9+  10+*
   COST                    Does not include shipping   $650  

*If a diamond plate induced slurry is used.